> For the complete documentation index, see [llms.txt](https://docs.coreway.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.coreway.com/yoov-work/zh-hk/attendance-management/yoov-attendance-machine-setup.md).

# YOOV考勤機設定流程

## 1. 設定考勤機 <a href="#id-1-set-attendance-machine" id="id-1-set-attendance-machine"></a>

1.1 考勤機支持網綫和WIFI兩種連接方式。

1.2 管理員用戶名與密碼、網絡設置、用戶授權。

<div><figure><img src="/files/A0QmBkL7alPVbGOcRi2F" alt=""><figcaption></figcaption></figure> <figure><img src="/files/5aymRngsQ7BWICS4A2Uz" alt=""><figcaption></figcaption></figure> <figure><img src="/files/0yefWSt3AsLIqELgCpX5" alt=""><figcaption></figcaption></figure></div>

<div><figure><img src="/files/Gewkb008CycUPurt8Vws" alt=""><figcaption></figcaption></figure> <figure><img src="/files/BbqSEzKfykJx5RqxrPg1" alt=""><figcaption></figcaption></figure> <figure><img src="/files/3H45HgVjbG7j9AHGP2RE" alt=""><figcaption></figcaption></figure></div>

## 2. 服務設定 <a href="#id-2-service-setting" id="id-2-service-setting"></a>

2.1 初始化設定好後，可長按屏幕(5秒以上) 以輸入管理員用戶名與密碼登入系統\
2.2 設定［場景模式］:\
［工程模式］>［場景模式］>［開放接口設置］ >［WebSockket設置］\
輸入 meg.entrysync.net/api/websocket (後台同樣操作也可)

<div align="left"><figure><img src="/files/dYaicluLV78ll8fGcHkD" alt="" width="410"><figcaption></figcaption></figure> <figure><img src="/files/wBGchGmwX1CPXjNfmLPS" alt="" width="422"><figcaption></figcaption></figure> <figure><img src="/files/ZBqkuIVbpwvo5ZTrSnPY" alt="" width="489"><figcaption></figcaption></figure></div>

<div><figure><img src="/files/gOzM6IizGp8Jd5q3zsop" alt=""><figcaption></figcaption></figure> <figure><img src="/files/uYF3I9hHfcdsxxza0BrU" alt=""><figcaption></figcaption></figure></div>

<figure><img src="/files/Rx6HcC03x6Jo9PRj4JNV" alt=""><figcaption></figcaption></figure>

2.3 考勤機［序列號］:\
［工程模式］>［系統設置］>［設備資訊］> 複製［設備序號］以添加到YOOV WORK後台

<div><figure><img src="/files/y5knFtWqcLCL2eN6ED8p" alt=""><figcaption></figcaption></figure> <figure><img src="/files/xwU1EgKEcc7iP6uq5fiI" alt=""><figcaption></figcaption></figure> <figure><img src="/files/wCYvpwF7TUWdNLNYM2Yw" alt=""><figcaption></figcaption></figure></div>

2.4 考勤機［後臺設置］:

［工程模式］>［系統設置］>［網絡設置］>［WIFI］> 將WIFI地址輸入網頁 > 進入考勤機後臺設置頁面 > 輸入管理員賬號密碼進入 > 添加WEBAPI接口地址

<div><figure><img src="/files/X9rs80fhKOmxZ6cDgeHU" alt=""><figcaption></figcaption></figure> <figure><img src="/files/73T9qkHT9XNIS19rMams" alt="" width="563"><figcaption></figcaption></figure></div>

## 3. YOOV WORK後台添加考勤機 <a href="#id-3-yoov-work-backend-add-attendance-machine" id="id-3-yoov-work-backend-add-attendance-machine"></a>

3.1 YOOV WORK後台添加考勤機\
［考勤管理］>［考勤設置］>［打卡方式］>［新增考勤機］> 輸入考勤機資料包括 "考勤機型號" 和 "序列號" 後, 按 "保存"

<figure><img src="/files/Fg46vCwrbc6H72U9g1mE" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/01mpW6CMEQAtUuPi6lCS" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/ftKAguZD4znCI5lzxkyF" alt=""><figcaption></figcaption></figure>

## 4.考勤機錄入員工數據 <a href="#id-4-attendance-machine-import-employee-data" id="id-4-attendance-machine-import-employee-data"></a>

4.1 新增員工到考勤機\
在 YOOV WORK 後台,［考勤設置］>［打卡方式］>［考勤機］> 選擇需新增人員的考勤機, 按 ''詳情'' >［考勤人員］> 按［新增］選擇員工

4.2 新增員工後需按［同步］

4.3 添加員工照片 \
在考勤機,［工程模式］>［人員管理］內添加員工照片

<figure><img src="/files/NUPH7UFjr2KxqfcmwP11" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/fZ0E9lEZvlFTZSn7VFp5" alt=""><figcaption></figcaption></figure>

<figure><img src="/files/YIh5aM1uBRXcwIziDEYT" alt=""><figcaption></figcaption></figure>

<div><figure><img src="/files/SNlKTauVSqy5dHL0knbn" alt=""><figcaption></figcaption></figure> <figure><img src="/files/eWDUPNjLWu4L0q767oHO" alt=""><figcaption></figcaption></figure></div>

## 5. 設定 IC 咭 <a href="#id-5-set-ic-card" id="id-5-set-ic-card"></a>

如要使用IC 咭(白咭) 打咭，管理員需要在考勤機上操作:

5.1 按［工程模式］>［人員管理］> 按入現有員工錄入咭資料，或新增員工 > 按入［設置卡號］，將相應IC咭拍到機身，考勤機會自動錄入咭號，按［完成］。

5.2 在［工程模式］>［通行設置］中，可選擇使用的打咭模式，如 IC咭或是人臉識別。

<div><figure><img src="/files/JA4kjHllnZ5zZeVyddm9" alt=""><figcaption></figcaption></figure> <figure><img src="/files/uwYOBWHiwgmhYisdtrX4" alt="" width="475"><figcaption></figcaption></figure></div>

<div><figure><img src="/files/xcjaWfjFcFE2xKpOzJ89" alt=""><figcaption></figcaption></figure> <figure><img src="/files/9d3UyeFKlXq9OHokWCA8" alt="" width="563"><figcaption></figcaption></figure></div>

<div align="left"><figure><img src="/files/MGFz5HpVIEcjqAIGwRJi" alt="" width="398"><figcaption></figcaption></figure></div>

## 6. 還原系統初始化配置 <a href="#id-6-restore-system-initial-configuration" id="id-6-restore-system-initial-configuration"></a>

6.1 方法一:\
6.1.1 需要先把背件移除，再用小螺絲批點著黑色小圈，長按十秒，直至看到機身畫面顯示 "初始化" 為止。\
6.1.2 把背件裝回，再重新設定考勤機

<div align="left"><figure><img src="/files/9aRjo9NCVbGZ2HLfWmrw" alt="" width="563"><figcaption></figcaption></figure> <figure><img src="/files/6IuKy8gRWDgTn6WfOGL4" alt="" width="563"><figcaption></figcaption></figure></div>

6.2 方法二:\
［工程模式］>［系統設置］> ［升級維護］>［恢復出廠設定］>按 "確定"

<div><figure><img src="/files/ee12rcxYIBf8eVTlcnYZ" alt=""><figcaption></figcaption></figure> <figure><img src="/files/J4Fo0u9NAoK5S7PkiUoK" alt=""><figcaption></figcaption></figure></div>

<div><figure><img src="/files/hgESsjR1yYgw0BuiZg7M" alt=""><figcaption></figcaption></figure> <figure><img src="/files/b21kBltWfb58ZIrJjMkP" alt=""><figcaption></figcaption></figure></div>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://docs.coreway.com/yoov-work/zh-hk/attendance-management/yoov-attendance-machine-setup.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.